Cody Lacey

This homeowner in Calgary, Alberta contacted us concerned with a leaking crack located in the basement wall. Cracks in foundation walls are common in homes throughout Alberta. Usually a side effect of the natural curing process of concrete, however when they leak they can cause a lot of mess and headache. In search of the best solution to address their concern, and protect their investment, these homeowners contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able to assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of this homeowners concerns. The foundation crack was then repaired by our Service Team utilizing a Polyurethane Resin injection, followed by reinforcing the crack with CarbonArmor®, a series of strips across the crack significantly improving the overall stability of the wall.

This homeowner in Southwest Calgary, Alberta contacted us with a concern regarding their sinking driveway. Both visually unappealing, and being a hazard, this was an issue that needed to be fixed with an efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can be driven over within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s driveway back to level with the curb towards the road!

This homeowner in Northeast Calgary, Alberta contacted us concerned in regards with their sinking front walkway under their steps. This is both visually unappealing and a hazard. Looking for an efficient way to solve this problem, the homeowners turned to Doug Lacey's Basement Systems.  

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of the homeowners concerns. The System Design Specialist had recommended using our PolyLEVEL® product to lift the walkway back to level. The PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway back level with the homes existing front step!

This homeowner in Lacombe, Alberta was worried that if their basement flooded during a power outage their existing sump pump would not be able to perform. Wanting to eliminate the water issues with a permanent solution they contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote on upgrading their sump pump. Our Production Team was then able to then come to the home to remove the old sump pump, replacing it with our SuperSump® sump pump system. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump. This pump is designed for reliability & high-volume pumping. Just in case of a power outage the Production Team had also installed the UltraSump® battery backup. The UltraSump® will pump 11,500 gallons or more on a fully charged battery!

This homeowner in Southeast Calgary, Alberta contacted us because they discovered that their carpet was wet and believed that there could be a leaking crack located in the basement wall behind the drywall. Cracks in foundation walls are common in homes throughout Alberta, however when they leak they can cause a lot of mess and headache. In search of the best solution to address their concern, and protect their home investment, these homeowners contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of the homeowners concerns. The foundation crack was then repaired by our Service Team using an injection of Polyurethane Resin, followed by reinforcing the crack with CarbonArmor®. CarbonArmor® are a series of strips that are secured across the crack significantly improving the overall stability of the wall.

This homeowner in Northeast Calgary, Alberta had encountered flooding because their existing sump pump had stopped operating. In search of the best solution they had contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote on upgrading their sump pump. Our Service Team was then able to come in and install a cast-iron Zoeller® ⅓ horsepower sump pump. Along with the sump pump the Service Team had installed a WaterWatch® Sump Pump Alarm. This alarm will sound off when a flood occurs, letting the homeowner know right away so they can jump into action. From there the Service Team had repaired the sump system's discharge line ensuring the water will be able to exit the home efficiently. This homeowner can now rest easy knowing their upgraded sump system is in place.

This homeowner in Airdrie, Alberta contacted us regarding their sinking front walkway. Both a tripping hazard and visually unappealing, this was an issue that needed to be fixed with an efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway back level with the homes existing walkway!

A couple in Coaldale, AB had an existing sump pump that clearly needed an upgrade. Wanting to get a new sump pump installed, they wanted the best so they contacted us at Doug Lacey's Basement Systems.
A System Design Specialist went to the home to perform a free inspection and then provided the homeowners with a FREE, no obligation quote designed specific to address all of their concerns. Our Production Team then went to the home to install our CleanSpace® vapor barrier  along the walls which prevents any future seepage through the foundation. The wall vapor barrier drains below the existing floor slab where a SuperSump® sump pump system will discharge the water to the exterior of the home. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump is designed for reliability & high-volume pumping.

These homeowners also wanted a new flooring that would keep their basement warmer, so our System Design Specialist suggested they have our ThermalDry Basement Floor Matting installed which does just that, plus it keeps it dry.

This business owner in Lethbridge, Alberta contacted us with concern regarding their sinking concrete slab at the service entrance door which causes water to pool in the summer months, and creates an dangerous icy section in the winter. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to the day to day operations of this business. Our expert PolyLevel® Team was able to lift this concrete slab back to level, eliminating the hazard!

A homeowner in Lethbridge, AB had been dealing with seepage along part of the east wall in the basement and front wall for years and is finally ready to fix it. Wanting to upgrade their sump pump and basin so that the area is sealed off and working properly to prevent these water issues. Our System Design Specialist who attended the home gave the homeowner a FREE, no obligation quote to resolve these issues.

The homeowner was excited, so she went ahead with the proposal and our production crews were arranged to go out and get to work!

A SuperSump® sump pump system and new basin were installed to replace the existing material that had been failing for many years. The system will discharge any water to the exterior of the home. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump, which is designed for reliability & high-volume pumping. A side discharge was installed instead. A side discharge is a really great option when the sump pump is to be located in a finished space in the basement. Similar to a top discharge the hole for sump is jackhammered and the basin is installed flush with the floor.  The difference with a side discharge is the plumbing off the pump is directed out the side of the basin below the lid.  We then install a solid lid that sits flush with the concrete floor.  The discharge line can then be run to the exterior wall and up the wall before being cored through to the exterior of the home.

The home owner can then finish with stud framing and drywall and conceal the discharge line. Carpet or other flooring material can be laid over top of the solid sump lid so long as access remains for future maintenance on the sump system.  

This homeowner in Drumheller, Alberta contacted us with concern over their sinking, uneven driveway. Both unappealing as well as being a tripping hazard, this was an issue that needed to be fixed. A System Design Specialist was able to visit the home and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little to no disruption or downtown to this homeowner's day. Our Team was able to lift this driveway over 3 inches back to level!

This homeowner in Claresholm, AB encountered issues with seepage in their cinder-block basement. Wanting to eliminate the water issues they contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of this homeowners concerns. Our Production Team then went to the home to install CleanSpace® vapor barrier along the walls which prevents any future seepage through the cinder-blocks. The wall vapor barrier drains below the existing floor slab where a SuperSump® sump pump system will discharge the water to the exterior of the home. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump is designed for reliability & high-volume pumping. Once the cement dries on the new system in place the homeowners can utilize this space without a worry!

This homeowner in Three Hills, Alberta contacted us concerned with their sinking front walkway. Both visually unappealing, and being a tripping hazard, this was an issue that needed to be fixed with a efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway back level with the homes existing front step!

This homeowner in Langdon, Alberta contacted us concerned with a leaking crack located in the basement wall below a window. Cracks in foundation walls are common in homes throughout Alberta. Usually a side effect of the natural curing process of concrete, however when they leak they can cause a lot of mess and headache. In search of the best solution to address their concern, and protect their home investment, these homeowners contacted the experts at Doug Lacey's Basement Systems. The foundation crack was then repaired by our Service Team utilizing a Polyurethane Resin injection, followed by reinforcing the crack with CarbonArmor®, a series of strips across the crack significantly improving the overall stability of the wall.

This homeowner in Langdon, Alberta contacted us with concern regarding their sinking front walkway. Both visually unappealing, and being a tripping hazard, this was an issue that needed to be fixed. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway back level with the homes existing front step!

This homeowner in High River, Alberta contacted us with concern regarding their sinking, uneven front step and walkway. Both visually unappealing, and being a tripping hazard, this was an issue that needed to be fixed. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little to no disruption to this homeowners day.

This homeowner in Chestermere, Alberta encountered issues with their existing sump pump not being able to keep up causing water to pool in areas around the basement. Wanting to eliminate the water issues they contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote on upgrading their sump pump. Our Production Team was then able to then come to the home to remove the failing sump pump and replace it with our SuperSump® sump pump system. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump, which is designed for reliability & high-volume pumping.

Now this homeowner can rest easy knowing they have the best sump pump system available in place.

This homeowner in Okotoks, Alberta contacted us with concern regarding their sinking, uneven front walkway. Both visually unappealing, as well as being a tripping hazard, this was an issue that needed to be fixed with a efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowners walkway back level, eliminating the hazard!

This homeowner in Okotoks, Alberta contacted us with concern regarding their sinking driveway outside of their garage. Both visually unappealing, as well as being a hazard, this was an issue that needed to be fixed with a efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowners driveway back level with the garage entry, between 6 and 8 inches in some spots!

This homeowner in Black Diamond, Alberta encountered issues with dampness and odor in their crawl space which also passes up through the floors to the rest of the home. Wanting to protect their home investment and eliminate the issues with a permanent solution, they contacted the experts at Doug Lacey's Basement Systems. A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of their concerns.

Our Production Team was then able to then come to the home to install our CleanSpace® crawl space vapor barrier. This durable, bright white crawl space liner once installed, prevents water vapor and humidity from passing through, protecting the rest of the home. By keeping your crawl space dry, you protect your structure and insulation from mold and rot.

This homeowner in NE Calgary, Alberta experiences regular cold and dampness in the basement floor of their home, not to mention that with its age it was also degrading in sections. Wanting to eliminate the water issues in the basement and get a permanent solution for their family home, they contacted the basement waterproofing experts at Doug Lacey's Basement Systems.

A System Design Specialist was able to visit the home to assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of the homeowners concerns. Our Production Team was then able to then come to the home to install our ThermalDry® Basement Floor Matting. a unique waterproofing product because it contains no chipboard, wood, or organic materials in its design. Additionally, it creates a vapor barrier on your basement floor, one that will not let damaging water vapor pass through. The air gap also creates a warmer environment in the basement. These homeowners can rest easy knowing they have the best solution in place and can get back to utilizing their valuable basement space! 

This homeowner in Calgary, Alberta contacted us concerned with a crack located in the foundation wall laeking during rainfall. Cracks in foundation walls are common in homes throughout Alberta. Usually a side effect of the natural curing process of concrete, these cracks usually do not threaten the foundation but can often leak causing water to enter the basement. In search of the best solution to address their concern, and protect their home investment, these homeowners contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of this homeowners concerns. The foundation crack was repaired utilizing a Polyurethane Resin injection, followed by reinforcing the crack with CarbonArmor®, a series of strips across the crack significantly improving the overall stability of the wall. This homeowner can now rest assured knowing the best solution for foundation crack repairs is in place!

This homeowner in NE Calgary, Alberta was planning on having some renovation work completed in the stairwell landing area of the basement and wanted to replace the drywall being removed with a more durable solution. Interested in learning what options were available, they contacted the basement experts at Doug Lacey's Basement Systems.

A System Design Specialist was able to visit the home to assess the situation and provide these homeowners with a FREE, no obligation quote. Our Production Team was then able to then come to the home to install our unique EverLast™ Finished Wall Restoration System. This allowed the homeowner to replace the bottom of their finished basement walls without ripping out any more existing drywall than necessary. 

This homeowner in NE Calgary, Alberta contacted us with concern regarding their sinking front walkway. Both visually unappealing with a large void between the walkway and steps, and being a potential tripping hazard, this was an issue that needed to be addressed. One of our System Design Specialists was able to visit with this homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s front walkway back level with the homes existing front step with relative ease!

This homeowner in NE Calgary, Alberta contacted us with concern over their sinking, uneven driveway. Both unappealing as well as being a tripping hazard, this was an issue that needed to be fixed. A System Design Specialist was able to visit the home and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little to no disruption or downtown to this homeowner’s day. This homeowner can rest easy knowing under their driveway has been stabilized and no futhur sinking or shifting should occur!

This homeowner in SW Calgary, Alberta contacted us with concern regarding their sinking front walkway. Both visually unappealing, and being a tripping hazard, this was an issue that needed to be fixed with a efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway back level with the adjacent concrete walkway, eliminating the hazard! 

This homeowner in Calgary, Alberta contacted us concerned with a crack located in the foundation wall located under their stairs. Cracks in foundation walls are common in homes throughout Alberta. Usually a side effect of the natural curing process of concrete, these cracks usually do not threaten the foundation but can often leak causing water to enter the basement. In search of the best solution to address their concern, and protect their home investment, these homeowners contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of this homeowners concerns. The foundation crack was repaired utilizing a combination of Hydraulic Cement and a Polyurethane Resin injection process.

This homeowner in Southwest Calgary, Alberta encountered issues with water entering their garage and pool in various areas. Wanting to eliminate the water issues, they contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able to assess the situation and provide the homeowners with a FREE, no obligation quote designed specific to address all of the homeowners concerns. Our Production Team was then able to then come to the home to install our TrenchDrain™ grated drainage pipe system. The grate is flush or slightly below the floor, eliminating any tripping hazard and is uniquely designed to span entryway doors. Any water passing over the drain is collected through the openings and redirected to our  SmartSump™ System (not shown in the photos) which comes equipped with a 1/3 horsepower cast-iron Zoeller® sump pump. This sump pump is capable of pumping 2,500 gallons per hour.

This homeowner in Northwest Calgary, Alberta encountered issues with water leaking in through foundation cracks around the property's basement during heavy rainfall. Wanting to eliminate the water issues permanently they contacted the experts at Doug Lacey's Basement Systems.

A System Design Specialist was able assess the situation and provide them with a FREE, no obligation quote designed specific to address all of their concerns. Our Production Team was then able to then come to the home to install CleanSpace® vapor barrier along the walls which is a 100% waterproof plastic that's perfect for unfinished basement walls. With a 25 year warranty for wear and tear, it's durable, washable, and has anti-microbial protection called UltraFresh built right in! The wall vapor barrier ties into the patented WaterGuard® drainage system. The WaterGuard® Below-Floor Drain System is designed with a built-in wall flange, which extends up your basement wall by 3/8", capturing any water leaking from the walls will move downward and behind this flange where it is then directed to the SuperSump® sump pump system. A full-featured system, SuperSump® includes the best components available including a top-rated 1/3HP Zoeller® pump is designed for reliability & high-volume pumping. This homeowner can now rest easy knowing that their home investment is protected.

This homeowner in NW Calgary, Alberta contacted us with concern regarding their sinking front walkway. Both visually unappealing with several pieces of lumber under the step, and being a hazard, this was an issue that needed to be fixed with a efficient solution. A System Design Specialist was able to visit the homeowner and explain why utilizing our NEW PolyLEVEL® product was the perfect solution for this problem!

PolyLevel® injection equipment isn’t bulky, enabling applicators to access confined areas. When properly injected, PolyLevel® is not as messy or disruptive as other slab and foundation-lifting techniques and can bear the full structural weight within about 15 minutes after the material is injected which means little disruption to this homeowner’s day. Our expert PolyLevel® Team was able to lift this homeowner’s walkway nearly 6 inches back level with the homes existing front step!